Running security camera wires of a surveillance wired system is the most complicated part of the installation process, there are many ways you can use for running camera wires soffit, ground, and walls.
But what is the right way to do this process?
Security cameras you install at home would be positioned out of your home. However, you will have the DVR mounted at a place inside the home.
This is where you will come across the need to understand how to run security camera wires through walls.
If you can follow an appropriate guide and if you can use the correct tools, you will be able to do this on your own. That’s why we thought of sharing this guide for you to follow.
Tools used For Run Security Camera Wire through Walls
Before taking a look at the steps, you need to understand what tools are needed. The tools that you would need to have are
- Screwdriver.
- Power plug.
- Camera cables.
- PVC conduit.
- Electric plastic box.
- Fish rod and bits.
These are the most common tools used by professional installers to run camera cables, you can choose any tool you want to do the work in the right way.
Steps to run the security camera wires through walls
Step1: Plan the route of wires
To run security camera wires through walls for the home system, you will have multiple cameras and wires connected to them. If you don’t plan the route of cables, you will end up in a disaster.
Hence, it is worth taking your time and planning the route of wires. You should understand where you should be placing the security cameras, are you want to install security cameras on stucco or on brick walls?
Then you will need to understand the place where you are going to keep the DVR. You should also have an electric plastic box, which can act as the junction for all the camera wires.
It should be placed in a position where there is enough safety and no one can reach it easily.
This Might Be Helpful: 7 Steps to install security camera junction box
Note: Make sure you choose the short route of wire to make the burial job easy on you, Look at the diagram of your house and check the best place for drilling and installing the system.
Step2: Install the cameras
After the extensive planning process, you can proceed to install the cameras. You can mount the cameras in the attic or through walls whatever you like.
First: To install security camera on Brick Wall, you will need to use an electric drill so that you will be able to create a gutter for having PVC, or metal conduits.
You will need to drill the brick wall and then position the polyvinyl chloride conduits accordingly.
These conduits will be used to pass the wires from your security cameras into the home.
In fact, these conduits are in a position to provide enhanced protection to all the security camera wires, so that no person will be able to cut them.
You can even use these conduits to enhance their protection from the weather in the long run. Plus, prevent the water to reach the cable inside the conduits.
Note: You should carefully position the PVC conduits. Then you can keep them in place, and you will never run into any problems with them in the future.
Second: For Wood Wall, running any security camera wires type through walls, especially wood walls is easier than running wires on brick walls.
You’ll need to use the fish tape to help you in your job of security camera cabling, fish tape uses to pull wires from the central hub to the cam location.
Note: Remember to get someone for helping you, one feeds the wires through walls and the other person pulls them.
For Analog CCTV or Digital cameras, there’s a mounting box that has 1 port or more For Ethernet or Coaxial cables depending on your needs, The mounting plate has screws to fix it and eliminate the increase of wires.
Once you finish pulling the wires and attach them to BNC or RJ45 cables then you can power the cameras.
For outdoor systems make sure the cameras are mounted near a power outlet, if you don’t find you can use an extension power cord, Or wireless battery cameras.
Step3: Connect the cameras
After finishing running security camera wires through walls to the interiors of your home, you will need to connect them.
Before that, it is better if you can test the connections and make sure that everything is in place.
You can use a Tester for doing this. Then you can turn on the security cameras and get connected to the DVR, or NVR in case of the Digital Network PoE system.
The Tester device has the ability to check both Coaxial cables and Ethernet also, so don’t worry!
This is where you can see whether visuals captured by the security cameras are coming to the DVR via the wires that you installed.
If you want to master how to run wire in any wall, watch the below video
Source: DPC Technology
Final words
Wireless security cameras can help you to overcome the struggles associated with wires. However, a wireless surveillance system is going to cost you a lot of money.
Hence, it is better if you can purchase a wired surveillance system and follow these steps. By following these steps, you can easily understand how to run security camera wires through walls.
Then you just need to focus on making other connections as shown in the user manual that comes along with the security camera system.
In the meantime, you should never ignore planning the positioning of the main box of the wired security system, as it can contribute to the safety of the home surveillance system in the future.
Now, you have a complete understanding of how to run security camera wires through walls, for more safety and to protect their system some people run security camera wires through soffit also, it’s hard, not easy but it’s secure also.
In case you have a car and want to monitor it and keep it away from thieves you can install a security camera in the car or outdoors around your car parking area.
Source: Chargèro
